23MM-4014-12LED鹰眼灯

【 Product Name 】: 23MM Eagle Eye Light Black Shell LED Reverse/Day Running/Lens/License Plate Light 10W Double Layer

【 Product size 】: 23MM

【 Shell color 】: Black shell/

【 Light color 】: Available in seven colors: white/blue/ice blue/red/yellow/green/pink

【 Product Usage 】: Car modification daytime running lights, reversing lights, anti attack lights, floor lights, and anti fog lights.




>>Product installation<<

1. Connect the rear reversing lights (fog lights) in parallel, and turn on the reversing lights (fog lights) to turn on the eagle eye lights.

2. Installation position, bottom of rear license plate light.

3. It can also be fixed and installed by drilling holes in suitable positions such as the rear bumper (with extended screws required).



>>Wiring method<<

Mode 1: Start with the light on, connect the red wire to ACC, also known as key power, and connect the black wire to ground;

Mode 2: Turn on the small light to turn on the light, connect the red wire to the positive pole of the small light, and connect the black wire to the negative pole of the small light;

Mode 3: Turn on the fog light and turn it on. The red wire is connected to the positive pole of the fog light, and the black wire is connected to the negative pole of the fog light.




>>Product Features<<


Light source: LED belongs to the semiconductor solid-state light source, which is vibration resistant, waterproof, and highly efficient, and is a green light source. The European automotive industry already has mandatory standards for using LEDs as automotive light sources.


Energy saving: It is 1/10 of the energy consumption of traditional halogen lamps, which can better protect automotive circuits.


Long lifespan: Up to 50000 hours of service life, traditional light bulbs do not exceed 2000 hours.


Fast start: LED does not require a hot start time, and its response speed to light up is fast (nanosecond level), suitable for fast moving objects.




>>Installation precautions<<


No need to modify the circuit, directly replac the original traditional glass bulb. Please be careful when replacing the original car bulb as it is very hot! LED has positive and negative electrodes. If it doesn't light up, just change the direction (meaning to change the electrode).